C5 C6 Front Brake Conversion Hubs Bearings Bracket Kit


Flange Included: No
Wheel Studs Included: No
Flange Bolts Included: No
California Proposition 65: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov


UMI’s C5/C6 conversion kit includes laser cut UMI conversion brackets, light weight USA made aluminum hubs and premium bearings. P/N 304647 includes everything needed to adapt the C5/C6 abutment brackets, calipers and rotors to the G-Body spindles.  The hub features 5 x 4-1/2 and 5 x 4-3/4 bolt patterns and is intended to face mount the C5/C6 brake rotor in exact factory location (front track width is unaffected). The kit includes premium bearing cups and cones along with the correct rawhide seal for great performance and reliability. The 304647 kit is the choice for UMI’s Green Machine and has been thoroughly tested to withstand road race and auto-x competition. 100% manufactured in USA as well as tested and raced out of Philipsburg, PA – USA.
Kit includes: UMI conversion brackets, driver and passenger side aluminum hubs, correct bearings and seals to mount the C5/C6 calipers and abutment brackets. Wheel studs are not included, 1/2-20 threaded studs will be required to complete installation. Determine stud length after choosing wheel and considering offset, whether or not spacers are required, and after determining wheel flange thickness. Kit requires C5 or C6 calipers, rotors, brake pads and brake lines. A detailed list of GM part numbers is included.
Requirements: C5 brakes require a minimum of a 17” wheel for clearance while C6 requires an 18”wheel. Please research wheel fitment before purchasing.

Additional information

Weight 3.6287 lbs
Dimensions 30.48 × 25.4 × 20.32 in
Flange Included


Wheel Studs Included


Flange Bolts Included